Author Topic: Help with prop adapter  (Read 898 times)

0 Members and 1 Guest are viewing this topic.

Offline Wayne

  • Airplane Expert
  • Sr. Member
  • *
  • Posts: 426
  • Country: us
    • Flying Eagles INC
  • Awards: MulticopterCentury ClubRC AddictPlanker Builder GoldHelicopter Gold
Help with prop adapter
« on: August 12, 2015, 07:16:14 AM »
Hey guys, my C182 chewed a prop adapter, can anyone help me find a replacement?  It looks like this one and space between the holes is about 14mm.  I can't seem to find anything on HK??


Offline tntrcnutz

  • Helicopter Pilot
  • Sr. Member
  • *
  • Posts: 467
  • Country: us
  • TIM AND TINA ARE RADIO CONTROL NUTZ
    • My YouTube Videos
  • Awards: Planker pilotPlanker builderoldfartRC AddictHeli PilotHeli Builder
Re: Help with prop adapter
« Reply #1 on: August 12, 2015, 08:18:05 AM »
Give me all of the info for the motor and I will find it for you .
You may also be able to go to your local hobby shop with the motor and find one through great planes or horizon .
Both carry a large range of adaptors.

I will do some research in the mean time

 :t2962:



IF FLYING R.C. WAS ILLEGAL... HER AND I WOULD BE CAREER CRIMINALS

Offline Wayne

  • Airplane Expert
  • Sr. Member
  • *
  • Posts: 426
  • Country: us
    • Flying Eagles INC
  • Awards: MulticopterCentury ClubRC AddictPlanker Builder GoldHelicopter Gold
Re: Help with prop adapter
« Reply #2 on: August 12, 2015, 10:48:52 AM »
Ha!  LHS was NO help!!  I have no idea what the motor is.  This was on the C182, who makes those again?  Came from xheli.  I don't even know if that's the motor that came from it or a replacement.  Like I said, no markings on the motor though and it was long time ago I got it...

Offline tntrcnutz

  • Helicopter Pilot
  • Sr. Member
  • *
  • Posts: 467
  • Country: us
  • TIM AND TINA ARE RADIO CONTROL NUTZ
    • My YouTube Videos
  • Awards: Planker pilotPlanker builderoldfartRC AddictHeli PilotHeli Builder
Re: Help with prop adapter
« Reply #3 on: August 12, 2015, 03:09:50 PM »
http://www.valuehobby.com/accessories/motor-accessories.html?p=3

take a look at these from value hobby
if it is the plane I am thinking of it might be one of these on the list
research each motor or that they all will fit and I think you will find a match

I will keep plugging away at it

 :t2030:


IF FLYING R.C. WAS ILLEGAL... HER AND I WOULD BE CAREER CRIMINALS

Offline Wayne

  • Airplane Expert
  • Sr. Member
  • *
  • Posts: 426
  • Country: us
    • Flying Eagles INC
  • Awards: MulticopterCentury ClubRC AddictPlanker Builder GoldHelicopter Gold
Re: Help with prop adapter
« Reply #4 on: August 12, 2015, 10:14:01 PM »
Ok, so I don't see any specs at all on these prop adapters and two of the four are out of stock.  Do I just order the two they have in stock and try them??

Offline tntrcnutz

  • Helicopter Pilot
  • Sr. Member
  • *
  • Posts: 467
  • Country: us
  • TIM AND TINA ARE RADIO CONTROL NUTZ
    • My YouTube Videos
  • Awards: Planker pilotPlanker builderoldfartRC AddictHeli PilotHeli Builder
Re: Help with prop adapter
« Reply #5 on: August 14, 2015, 01:18:15 PM »
Lets try this
 :scratching_chin1:

What size prop were you running because it would help me narrow it down
But I believe it would be the one for the g force e 400 ???? the prop range for this motor is 8 to 10 inch props ..slightly smaller adaptor
The prop ranges for the G 32 are in the 12 to 13 inch range which means a larger adaptor

 :t2923:


IF FLYING R.C. WAS ILLEGAL... HER AND I WOULD BE CAREER CRIMINALS

 

Back to top