Author Topic: Another Mobius Gimbal  (Read 788 times)

0 Members and 1 Guest are viewing this topic.

Offline icecycler

  • "On-the-fly-NewsGuy"
  • Administrator
  • Hero Member
  • *
  • Posts: 2991
  • Country: us
  • Men and Their Flying Machines Somewhere Over OZ
  • Awards: On the Fly News Guy450 Fixed PitchMulticopterHelicopterRC AddictHeli PilotOld FartKK2Multicopter
Another Mobius Gimbal
« on: March 10, 2015, 09:47:50 PM »
This is a 2 axis gimbal.

Turnigy™ have recognized the Mobius ActionCam as the go-to camera for RC enthusiasts and set out to make a low cost, light weight, quality component 2-Axis gimbal to match the Mobius’s smaller size.

Design of the Turnigy™ Mobius gimbal started with the popular AX 2206 BLGM Brushless motor, perfect for its small size and being well known as a great motor. From there Turnigy had the motors custom made to match their spec.

Turnigy™ then set out to create a lightweight and robust frame around the Mobius and your chosen hardware which is compatible with the Quanum Nova and DJI Phnatom Quadcopters.

The result is the one of best gimbals available for the user that wants the flexibility of choosing their own controller and best of all it’s made specifically for the Mobius.

Features:
• Light Weight
• AX2206 Gimbal motors
• Roll and pitch control
• Adjustable axis position
• ALL CNC Aluminium and composite frame

Frame Specs:
Size: HxWxL 76x67x100mm max all around size
Weight: 160g (including motors)

Motor Specs Turnigy ™ AX2206:
Poles: 12N14P
KV(RPM/V): 140
Resistance: 11.25omh
Weight: 32.3g
Wire: 0.17mm
Torque: 230g
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm

Included:
Mount Frame and fastners
Vibration damping balls
Controller mounting board
2 Turnigy ™ AX2206 brushless outrunner motors

Note: This is a Kit and does require some assembly.

Note: Please pay close attention to the bolt locations in the instructions, and note the pitch motor uses the two 6mm bolts, if the 8mm bolts are used could damage the motor windings causing the pitch axis to shake when powered.

Note: Camera and Controller Not Included

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=73016&aff=292531

On the Fly NewsGuy:

 :freeze:    ****Ice****

Tools, Tools, Tools gotta have Tools. Without Tools The World Would Not Be Like it is Today!!!---------- Laugh A Lot Everyday, Life is too Short To Be Grumpy!!!-------Exercise Your Brain Build and Fly R/C!!!

 

Back to top